FreePCB project report (default units = MIL)
============================================
Project name: Accuprobe_SMT
Project file: C:\Users\pmesser\_Paul\Design\Accuprobe_SMT\PCB\Accuprobe_SMT.fpc
Default library folder: c:\users\pmesser\_paul\design\my_freepcb_library

Board statistics
==============
Number of copper layers: 4
Number of board outlines: 1
Board outline(s) extent: X = 3200 MIL; Y = 500 MIL
Number of parts: 27 (without footprints = 8)
Number of pins: 51 (12 through-hole, 39 SMT)
Number of vias: 5
Number of holes: 17

Drill list
==========
NUMBER  DIAMETER
------  --------
    5   21 MIL
    5   41 MIL
    6   28 MIL
    1   125 MIL

Part list
=========
For parts on top: the angle is in degrees CCW, as viewed from the top
For parts on the bottom: the angle is in degrees CCW, as viewed from the bottom by flipping the PCB left-right
All centroid coordinates are as viewed from the top

  REF     PACKAGE  VALUE   FOOTPRINT  PINS  HOLES    SIDE  ANGLE  CENT X  CENT Y  PIN1 X  PIN1 Y  GLUE W  GLUE X  GLUE Y
  ---     -------  -----   ---------  ----  -----    ----  -----  ------  ------  ------  ------  ------  ------  ------
BOM_1   NOPACKAGE                                                                               
BOM_2   NOPACKAGE                                                                               
BOM_3   NOPACKAGE                                                                               
BOM_4   NOPACKAGE                                                                               
BOM_5   NOPACKAGE                                                                               
BOM_6   NOPACKAGE                                                                               
BOM_7   NOPACKAGE                                                                               
BOM_8   NOPACKAGE                                                                               
   C1        0805               0805     2      0     top    270     550     205     550     250      10     595     205
   C2        0805               0805     2      0     top      0     805     350     850     350      10     805     305
   C3        0805               0805     2      0     top      0    2280     350    2325     350      10    2280     305
   D1       SOT23              SOT23     3      0     top    270     712     210     750     250      10     712     212
   D2       SOT23              SOT23     3      0     top    270    1847     210    1885     250      10    1847     212
   D3   1206DIODE          1206DIODE     2      0     top    180  2567.5     250    2500     250      10  2567.5   317.5
   J1   CutStrap1          CutStrap1     3      2     top    180     550     360     550     360
   J2    SqPin1x3           SqPin1x3     3      3     top    270    2900     350    2900     350
  MH1        MHP4               MHP4     1      1     top    180     250     250     250     250
   R1        0805               0805     2      0     top     90     850     220     850     175      10     805     220
   R2        0805               0805     2      0  bottom    270    1000     255    1000     300      10     955     255
   R3        0805               0805     2      0  bottom    270    1100     255    1100     300      10    1055     255
   R4        0805               0805     2      0     top    270    1720     215    1720     260      10    1765     215
   R5        0805               0805     2      0  bottom    270    1450     255    1450     300      10    1405     255
   R6        0805               0805     2      0     top      0    2005     350    2050     350      10    2005     305
   R7        0805               0805     2      0  bottom     90    1540     255    1540     210      10    1585     255
   R8        0805               0805     2      0     top    270    2730     295    2730     340      10    2775     295
  SW1  SWDPDTSLD1         SWDPDTSLD1     6      6     top    180    1050     125    1200     305
   U1       SOIC8              SOIC8     8      0     top    270    2160     200    2050     275      10    2125     200

Gerber file settings
====================
Include board outline: YES
Include moires: NO
Include layer description text: NO
Include pilot holes: YES
Connect SMT pins to copper areas: NO
Use thermals for SMT pins: YES
Use thermals for through-hole pins: YES
Use thermals for vias: YES
Make solder-mask cutouts for vias: NO
Use 90-degree thermals for round pins: NO
Copper to copper-fill clearance: 20 MIL
Hole-edge to copper-fill clearance: 20 MIL
Solder mask clearance: 0 MIL
Pilot hole diameter: 15 MIL
Minimum silkscreen line width: 5 MIL
Thermal relief line width: 25 MIL
Board outline line width: 10 MIL
Minimum annular ring width (pins): 7 MIL
Minimum annular ring width (vias): 5 MIL
Amount to shrink SMT pads for paste mask: 0 MIL

DRC settings
============
Minimum trace width: 10 MIL
Minimum pad to pad clearance: 10 MIL
Minimum pad to trace clearance: 10 MIL
Minimum trace to trace clearance: 10 MIL
Minimum hole to copper clearance: 15 MIL
Minimum hole to hole clearance: 25 MIL
Minimum annular ring (pins): 7 MIL
Minimum annular ring (vias): 5 MIL
Minimum board edge to copper clearance: 25 MIL
Minimum board edge to hole clearance: 25 MIL
Minimum copper area to copper area clearance: 10 MIL
